Guangzhou Heyi Craft Product Co., Ltd.

Variable Angle Ultrasonic Detector, Steel Ultrasonic Transducer, Straight Beam Probe (GZHY-Probe-002)


Angle Beam Transducers are single element transducers used with a wedge to introduce longitudinal or shear wave sound into a part at a selected angle. Angle beam transducers allow 
inspections in areas of a part that cannot be 
accessed by the ultrasonic path of a normal incidence contact transducer.A common use for angle beam transducersis in weld inspection,where a weld crown blocks access to the weld 
zone of interest for a standard contact transducerand where typical flaw alignment produces stronger reflections from an angled beam.
 
Transducers for the Contact Inspection Method
Angle Beam Transducer
Element mounted on integral or replaceable wedge
Uses refraction to transmit shear or longitudinal wave at a predetermined angle
Most standard transducers generate shear waves by mode conversion
Preferred for parts with inclinedflaws, such as welds
Available in both single and dual element types
Requires couplant layer, typically a gel, oil, or paste
Sometimes used in mechanized or automated testing
 
Application:
a. Common welding inspection.
b. Pipe casting, pressure wessels, storage tank.
c. Turbine blades and pressure vessels.
d. Wheel axle, forged piece and casting.
e. Railway wheels and railway rail.

Performance Features:
-BNC (Q9), Microdot (L5) connectors, applied for Chinese and US standard
-LEMO-00(C5), LEMO-1 (C9) connectors, applied for European standard
-Based on piezoelectric composite crystal
-More penetrating power in attenuation material
-Higher signal-to-Noise Ratio than Coarse-grained metal, Glass Fiber, and Reinforced Composite Materials
-Short Pulse-Higher resolution than conventional series
-Sensitivity- 3-6 dBhigher than conventional series
-Bandwidth- -3dB relative widebandwidth from 60% to 120%
-Low Acoustic Impedance - Increased acoustic matchingof angle probe, delay probe and immersion 
probe, with higher sensitivity & bandwidth


FAQ:

Q:Do you accept OEM orders?
A: Yes, we provide OEM services to worldwide customers.

Q:What's the MOQ?
A: MOQ is 1pc for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.

Packing & Shipping
1. How does it get packaged?
It is packaged by Carton or wooden case to ensure the product safe. We also can package the product as your requirements.
Q:How long is the lead time?
A: The lead time for single order is 1-3 days, for bulk orders is 3-10 days.

Q:How to place orders?
A: 1. Email us the model and quantity, consignee information, shipping way and payment terms; 
2. Proforma Invoice made and sent to you; 
3. Complete Payment after confirming the PI; 
4. Confirm Payment and arrange production.